Comparison of mechanical and
In contrast, mechanical, process is extremely complex, and some small parts of high-end mechanical watches to reach thousands more have condensed the designers and craftsmen of the wisdom and sweat, there is a very high collection value, so than the same brand of quartz Table expensive, selling table when the table row will be for your school table, usually every ten seconds or so are considered normal error.
Some high-end mechanical watches brand can use for centuries.
Good table are generally very wearable sapphire crystal, ruby eye axis, the movement is very precise, and so on.
The above recommendations, Best Swiss Replica only for the landlord reference.
As for the quartz watch and the mechanical watch depends on personal preference and the degree of understanding and fever of the table!
Customers buy hand live interviews, always want to strive to seek better pick a good one of the most desirable watches.
How can I choose to watch it 499 satisfied? When selecting the watch, do not get up to put on a full spring, should be slowly on the next 2 to 3, with the second hand on a watch if starting with the sensitive, fast start, the more sensitive.
After a few clockwork appearance depends on the table, try the pin was removed, and then put her hand on the table close to the ear, carefully listening to the sound, listen to watch stand and lie down in their home for two levels sound, if the sound is the same or substantially the same, in the full winding listen without changes, such as watches go well unchanged.
<Span id = “more-499”> </ span> specifically to pick from the following aspects: (1) check the appearance: the case should not have trachoma and Swiss Replica scratches, edges and corners should be proportionate, should cover four weeks away from the seam substantially uniform, to tighten the gasket should be equatorial, and not out of the table should be transparent glass bright, no scratches; equatorial dial want, and not have fingerprints; hands should be clean, no injuries, no pan-color, flat side allowed high while low; table disk of minutes and seconds tick intact, two strap loop is equal to the distance from the case, pull the strap loop to check whether off easily.
(2) Check the sensitivity.
(3) Check the article: The good watches rotation arbor, first moved very loose, then getting tight, can not continue to turn in, indicating the full winding yourself.
If you turn the handle shaft issued a “whisper” sound or caused to slip, the instructions on the part of a cell barrier strip.
(4) clearance and check the position of the hands of: between the needle and the needle watch, needle and dial needle and table glass has a gap of about 0.1 to 0.3 mm.
If the mutual collision, it will affect around.
Check the hour Best Swiss Replica and minute hands with each other in the correct position, clock can be pulled to 9:00, the minute hand pull to 12 points, so that the two pins at right angles; then pull to 6:00 now, so that the two needles in a straight line, finally pulling to 12:00 positive, make two needle coincide.
(5) inspection, the tightness of the minute hand rotation: clockwise rotation will be twelve hours, if within twelve hours, minutes are not apparent tightness tight or too loose, normal assembly instructions.
Push, pull, turn the winding should be flexible and reliable.
And push the knob head table when the machine can not move in the shell.
(6) Check the watch walking sound: After fully wound, the watch position respectively in six directions (surface upward, downward, the stem up, down, left and handle handle right), listen to his “tick” “despair” sound, sound good watch at various locations relatively stable, uniform, clear and there are lingering.
So, put your ear to hear 459.html watch, not listen to the voice of the size, but there is no listening watch unusual sounds to the size of the phonetic sounds to judge the quality of the table is good or bad is not scientific .
Comparison of mechanical and